Basic Info.
Model NO.
DS-UV365C2&395C-5054CA-M-C-8
Emitting Color
Purple Light
Application Field
UV Nail Cure
Chip
13mil*13mil&9mil*22mil
Applicable Products
UV Curing
Transport Package
Vacuum Package
Specification
5.00mm* 5.40mm* 3.30mm
Product Description
Product Description
Product Parameters
Lens cleaning :
In the case where a minimal level of dirt and dust particles can not be guaranteed, a suitable
cleaning solution can be applied to the lens surface
1. Try a gentle swabbing using a lint-free swab
2. If needed, the use of lint-free swab and isopropyl alcohol used gently removes dirt from
the lens surface
3. Do not use other solvents as they may directly react with the LED assembly
4. Do not use ultrasonic cleaning that the LED will be damaged
Handling :
Care must be taken not to damage LED's silicon while exposing to high temperature or contact
LED's epoxy resin with hard or sharp objects, such as metal hook, tweezer or sand blasting.
Storage Conditions :
1,Before the package is opened :The LEDs should be stored at 30°C or less and 85%RH or
less after being shipped from Everlight and the storage life limits are 1 year. The LEDs can be
stored up to 3 years if in a sealed container with a nitrogen atmosphere and moisture absorbent
material.
2, After opening the package: The LED's floor life is 168hrs when environment is 30ºC or less
and 60%RH or less. The LED should be soldered within 168hrs (7days) after opening the package.
If unused LEDs remain, it should be stored in moisture proof packages.
3, If the moisture absorbent material (silica gel) has faded away or the LEDs have exceeded
the storage time, baking treatment should be performed using the following conditions. Baking
treatment: 60±5ºC for 24 hours.
ESD
Static electricity and high volt can damage led, The production whose Die material is InGaN must
strictly required to prevent ESD, Must put on static glove and static fillet, Soldering tool and the
cover of device must connect the ground, oldering condition follows the related stating of productioRecommended Circuit
The current through each LED must not exceed the absolute maximum ratings when designing
the circuits.
In general, there can be various forward voltages for LEDs. Different forward voltages in
parallel via a single resistor can result in different forward currents to each LED, which also can
output different radiant flux values. In the worst case, the currents can exceed the absolute
maximum ratings which can stress the LEDs. Matrix circuit with a single resistor for each LED is
recommended to avoid the radiant flux fluctuations.
The driving circuits must be designed and operated by forward bias only so that the LEDs are
not to be operated by the reverse voltages while turned off, which can damage the LEDs.
Reverse voltage can damage the zener diode and cause destructions.
Company Profile
Certifications
FAQ
Q1. Prices condition
A: Price can be FOB, CIF ,EXW, or With taxes.
Q2. What will be the delivery time and what will be the mode of payment ?
A: We have large quantities in Stock for normal color,Normal size ,for special color and products sizes it need to 3-5 days to customize.50K units is available for most of our models in normal color and sizes.
The payment can be T/T transaction, Letter of credit,Western Union.
Q3. Shipment will be over sea or by air ?
A:Generally speaking ,we ship the products by DHL UPS FEDEX express since the products isn't too heavy for the transportation.
Q4. Could you please send me the sample for the same . So that i could see and analyze its quality?
A:Yes. We can send samples first, samples need to be charged if the value is higher.
Q5. Will there be any contract for this business or trade ?
A:Yes, there is a normal contract before the order is placed.
Address:
Building 1-03, Shuangchuang Street, E22 Xinke Road, Yiwu, Jinhua, Zhejiang, China
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Lights & Lighting, Packaging & Printing
Management System Certification:
HQE
Company Introduction:
Zhejiang Danse Electronic Technology Co., Ltd., founded in 2004, is the pioneer of UV LED industry in China. In 2017, it became the first recognized national high-tech enterprise in UV LED industry (Certificate No.: GR201733002547). Developed 11 patent products in the field of UV LED. The company is committed to providing UV LED alternative solutions for customers to develop violet light application products and developing and manufacturing high reliability UV LED light source and UV LED light source module. Since 2006, we have developed and designed UV LED light source for the new NATIONAL standard Class A money counting machine, mixed wave manicure phototherapy, 3D printing, flowing water sterilization, medical phototherapy and other fields. After more than ten years of accumulation, the company formed UVA (320-430nm)/UVB (280nm-320nm)/UVC(250nm-280nm) full package series of UV LED light source and the development of customized UV LED light source module two product systems. At the same time, the company has built a research and development innovation system jointly developed with the Chinese Academy of Sciences and a supply chain system built by integrating domestic and foreign superior resources in the FIELD of UV LED. We hope to work together with colleagues in the industry to promote the healthy development and popularity of THE UVLED market and contribute to the cause of environmental protection.